Skip to content

Vulcan V-100

Boom
100,000 lbs.
Underlift
55,000 lbs.
Tow Rating
80,000 lbs.

Vulcan V-100 Photos

Almost two decades ago, Vulcan became a pioneer in the heavy-duty integrated towing and recovery market with the introduction of the Vulcan 940 and then continued its advancement in equipment technology with the Vulcan 3025. Now available with an optional 3rd winch, the V-100 now has even greater recovery capabilities.

The V-100 is just one more example of Vulcan's continued pursuit in providing the most innovative equipment to meet the demands of professional heavy-duty operators.Toolbox compartments with keyless entry, 2-speed winches, the Euro-lift stinger with a 144” of reach and a 3-stage recovery boom providing over 25 feet of boom elevation are just a few of the many standard and optional features that have continued Vulcan's legacy as the innovator .... Not the imitator.

Features

Standard

  • Dual Control Stations with Direct Link Activated Levers
  • Pressure Gauges
  • Hour Meter
  • Hydraulic Pump
  • Independent Hydraulic Rear Spades
  • Pavement Pads (n/a with Flipper Feet)
  • Tailboard D-Rings
  • Safety Chain in Rear Pockets
  • Tailboard Fork & Tie-Down Storage
  • Tailboard Recovery Anchors
  • Air & Electric Hook Up

Boom

  • Power Elevation
  • Power Extension
  • 360° Sheave Heads
  • Cable Tie Backs
  • Spherical Bearings in Main Boom
  • Dual 2-Speed Planetary Winches
  • Cable Tensioners
  • Winch Air Free Spool

Body

  • Aluminum Modular Body w/Rubber Mounting Isolators
  • LED Body Lighting
  • LED Tool Compartment Lighting
  • Gas Door Shocks
  • Chrome Double Action Latches with Keyless Lock and Unlock
  • Adjustable Shelves
  • Lift Fork Storage
  • Chain Storage
  • Aluminum Tread-Plate Walkway
  • Mud Flaps

Underlift

  • Patented Power Tilt / Hydraulic Fold
  • King Pin Tow Plate
  • 3-Stage Design
  • Pivoting Spring Lift Adaptors
  • Chain Hook End Caps
  • 12 FXN Wireless Remote Control with Charging/Docking Station
  • Low Profile 70° Pivoting Heavy Duty Fabricated Cross Bar
  • Low Profile Fork Holders
  • 9 Sets of Cast Steel Forks:
           3” Short, 3” Medium, 3” Tall
           4.5” Short, 4.5” Medium, 4.5” Tall
           Grab Axle Fork, 6” Short Offset
           Round Axle Fork

Optional

  • Air Shift PTO
  • MMO Power Distribution
  • Light Pylon
  • Euro Stinger - 144” (V70/V-100 only)
  • Multi-Position Flipper Feet
  • Rear Outrigger
  • Heavy Duty Tire Lift
  • Tire Lift Storage Brackets
  • Fork Risers
  • Pintle Hook Attachment
  • 5th Wheel Plate (Requires Pintle Hook Attachment)
  • King Pin Attachment (Requires Pintle Hook Attachment)
  • Trailer Ball Adapter (Requires Pintle Hook Attachment)
  • Additional Lift Forks
  • Underlift Light Kit (LED)
  • Additional Lighting
  • Side Work Lights
  • Chain Package
  • Endless Loop Sling Package
  • Screw Pin Shackle Kit
  • Spreader Bars
  • Tailboard Underlift Controls
  • 3 or 4 Drawer Toolbox
  • Water Tank Kit
  • Snatch Blocks
  • Wide Load Light Bar
  • Dual Camera & Monitor
  • Convenience Groups
  • Aluminum Dress Up Kits
  • Installation
  • 22,000 lb Under Boom Auxilary Winch

Specifications

Boom—3 Stage

Retracted 30˚ 100,000 lbs.
Extended 30˚ 18,000 lbs.
Maximum Angle 35˚
Maximum Hook Height 304”
Hydraulic Boom Extension 216”

Underlift

Feature V-100 Standard V-100 Euro-Stinger
Capacity Fully Extended to C.L. of Forks 18,000 lbs. @ 116” 18,000 lbs. @ 144”
Capacity Fully Retracted to C.L. of Forks 55,000 lbs. @ 60” 55,000 lbs. @ 67”
Underlift Tilt 18° 18°
Tow Rating 80,000 lbs. 80,000 lbs.

Winch

Main Winch Auxiliary 3rd Winch
Winch Capacity 50,000 lbs. 22,000 lbs.
Winch Type Dual Planetary Winch Planetary Winch
Cable Specifications 3/4” x 250’ 5/8" x 150'
Cable Type 6X37 I.W.R.C. I.W.R.C.

Body

Feature V-100 Tandem Axle V-100 Tri Axle
Common Body Configuration 160” C.B. 180” C.B.
Additional Body Configurations 180” / 200” / 220” C.B 200” / 220” C.B.

Chassis Recommendation

Front Axle 14,600 lbs.
Rear Axle 40,000 lbs.
Clear C.A. to C.B. 156” – 220” C.B.
After Frame from Center of Rear Axle 36”
RBM 3,000,000 in/lbs.