
40 Series
Features
Standard
- 102” Wide Body
- 1/4” Smooth Floor Plate (Steel Floor)
- 4” x 3” Structural Tube Crossmembers on 8” Centers
- Floor Level Sides
- Heavy Duty Approach Plate
- Full Length Subframe
- Fixed Position Stabilizer
- Tri-Axle Configuration
- Illuminated Dual Controls
- 15,000 lb Planetary Upright Winch with 1/2” x 75’ Cable
- Air Free Spool Winch
- 24 GPM Direct Mount Pump
- Body Lock
- Mudflaps
- Federal Standard 108 Shock Mounted Lighting
- 10 Body Marker Lights
- Water Resistant Junction Boxes for Wire Harness Connection
- Lubrication Fittings on all Pivot Points
- 6 Chain Locks
- Mechanical Anti-tilt
- Inboard Tilt Cylinders
- Front Left and Right Chain Trays
- BackUp Alarm
- Cable Tensioner
- Black Body Paint
- Tow Light Plug
- Pilot Operated Holding Valves On Tilting and Lifting Functions
- Two Safety Chains
Optional
- Removable Rails
- Welded Open Rail Sides
- Floor Level Sides with Stake Pockets
- Trailer Style Rubrails
- Additional Chain Locks
- 1/4” Deck Plate Floor
- 1 1/4” Apitong Hardwood Floor
- Steel Floor Overlay on Wood
- 20,000 lb Planetary Upright Winch
- 30,000 lb Planetary Upright Winch
- Air Tensioner and Regulator
- Winch Guard Bulkhead
- Heavy Duty Cab Protector
- PTO
- Retractable Ladder
- Aluminum Tool Box
(33” L x 18” H x 18” D) - Aluminum Tool Box
(49” L x 18” H x 18” D) - Aluminum Tool Box
(65” L x 18” H x 18” D) - Factory Installation
- Factory Paint Other Than Black
- Hydraulic Rear Stabilizer
- Combination Underlift/Hydraulic Rear Stabilizer
- Galvanized Subframe
- Wired Remote Control
- Radio Remote Control
- Cab Protector Window Screen
- Cab Protector Window Grid
- Lockable Chain Racks
- Wheel Pockets with Removable Aluminum Covers
Accessories
- Bar Light
- Work Lights
- Switch Panel
- Frame Forks for Underlift Crossbar
- Frame Fork Storage Rack
- Underlift Pintle Hitch
- Stabilizer Mounted Pintle Ball Hitch
- Magnetic Tow Lights
- J-Hook Chains
- Front Hook-Up Chain
- Mudflaps
Specifications
Platform
Body Width | 102” Outer Deck | |
Body Extension | 120” | |
Wheel Lift Reach | 65” | |
Control Valve | Sectional, 20 GPM, 2000 PSI | |
Oil Reservoir | 24 Gallons | |
Oil Filter (Immersable) | 250 PSI, 25 GPM, 10 Microns | |
Pump | 24 GPM | |
Body Rating * | 40,000 lbs. Evenly Distributed |
Underlift
Lift Rating—Extended | 10,000 lbs. | |
Tow Rating | 30,000 lbs. | |
L-Arms | 6,000 lbs. | |
Forks | 10,000 lbs. |
Chassis Recommendations
Minimum GVWR - 60,000 lbs. | ||
Tri-Axle Configuration | ||
Tag Axle - 52” on Center from Drive Axle | ||
After Frame 54” to 57” from Center of Trunion | ||
Accessible PTO Opening | ||
Maximum Frame Height - 44 Inches | ||
Minimum Frame Height - 39 Inches | ||
Frames Under 39 Inches - Consult Factory | ||
Minimum Frame RBM Each Rail 3,000,000 in/lbs | ||
Rear Axle Suspension Must Support Truck Frame Behind Rear-Most Axle | ||
Usable Cab-To-Bogie | 26’ | 174"-176" |
Usable Cab-To-Bogie | 27’ | 182”-186" |
Usable Cab-To-Bogie | 28’ | 190”-198" |
Usable Cab-To-Bogie. | 29’ | 198”-206" |
Usable Cab-To-Bogie | 30’ | 206”-214" |
Miller Industries reserves the right to improve or upgrade its products without obligation to modify previously manufactured units.
Patents and Patents Pending.
Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.
Keywords: chevron , 40 Series , new , roll back , flat bed , slide bed , tilt bed , heavy equipment carrier , carrier , heavy equipment movers , equipment towing , vehicle transport , equipment transport , forestry equipment , rental equipment , agricultural equipment , heavy equipment haulers , equipment mover , rental equipment transport , freight hauler , delivery vehicle , stake bed , miller industries