Series 20 Carrier 3 & 4 Car

 

SERIES 20 CARRIER
3 & 4 CAR
View Product Brochure
 

STANDARD EQUIPMENT

Aluminum or Steel Body  

Aluminum Body:

  • High Tensile Double-Box 4 Inch Extruded
    Smooth Floor System
  • Heavy Duty Extruded Sill with Integral Full Length Graphite-Impregnated Wear Strips
    Top and Bottom
  • Extruded Double-Box Sides
  • Rear Sill Reinforcements
  • 10 Chain Locks (4 Car)
  • 102 Inch Wide Body

Steel Body:

  • 3/16 Smooth Floor or 3/16 Deck Plate
  • 4 x 2 Structural Tube Crossmembers
  • Raised Steel Sides
  • 10 Chain Locks (4 Car)
  • 102 Inch Wide Body
  • Black Body Paint
Fully Hydraulic Hitch or Wheel Lift Tow Light Plug
Releasable L-Arms Water Resistant Junction Box for
      Wire Harness Connection
Mechanical Anti-Tilt
 
Lubrication Fittings on
      All Pivot Points
18 GPM Direct Mount Pump Two 8,000 lb.Worm Gear Deck Winches
Inboard Tilt Cylinders 9,000 lb. Planetary Winch
      With Cab Carrier
4 Light Tail Light Housing Pilot Operated Holding Valves
      On Tilting and Lifting Functions
Illuminated Dual Controls BackUp Alarm
10 Side Body Marker Lights (5 Per Side) 4 Safety Chains
Body Lock Federal Standard 108 Lighting
Mudflaps  
   

OPTIONAL EQUIPMENT

Removable Side Rails (Steel Only) Retractable Ladder
Welded Open Rail Sides (Steel Only) Factory Installation
Floor Level Sides with
      Stake Pockets (Steel Only)
Factory Steel Body Paint
       (other than black)
Additional Chain Locks Pivoting L-Arms
Two 9,000 lb Planetary Deck Winches AutoGripTM II Wheel Lift
24 GPM Direct Mount Pump Galvanized Subframe
PTO Air Free Spool Winch
Aluminum Tool Box
       (33L x 18H x 18D)
Wired Remote Control
Aluminum Tool Box
       (49L x 18H x 18D)
Radio Remote Control
Aluminum Tool Box
       (65L x 18H x 18D)
 
  View Product Brochure

Note:  Some option selections may not be compatible in certain configurations.

ACCESSORIES

Work Lights Front Hook-Up Chain
Switch Panel Trailer Ball Plate
Magnetic Tow Lights Pintle Hitch Attachment
J-Hook Chains L.E.D. Lights
   

SPECIFICATIONS

Steel Body Width 96 I.D. - 102 O.D
Aluminum Body Width 97 I.D. - 102 O.D
Body Extension 117 inches
Control Valve Sectional, 20 GPM, 1700 PSI
Oil Reservoir 12 Gallons (Low Mount Winch)
Oil Reservoir 24 Gallons (Upright Winch)
Oil Filter 250 PSI, 10 Microns
Pump 18 GPM
Body Rating* 20,000 lbs. Evenly Distributed
Hitch Rating * 3,500 lbs. Extended
Wheel Lift Rating* 4,000 lbs. Extended
Cab Carrier Rating* 5,000 lbs. Evenly Distributed

* Load ratings are based on structural factors - not chassis capability or capacity.

CHASSIS RECOMMENDATIONS

Recommended GVWR - 33,000 lbs.
Accessible PTO Opening
Maximum Frame Height - 42 Inches
Minimum Frame Height - 38 Inches
Carrier Length Minimum Frame RBM (Each Rail)
19 - 20    620,000 in. ● lbs.
21 - 22    800,000 in. ● lbs.
23 - 25 1,200,000 in. ● lbs.
26 - 28 1,800,000 in. ● lbs.
29 - 30 2,100,000 in. ● lbs.
CARRIER
LENGTH
USABLE CAB-TO-AXLE
WITH CAB CARRIER
19 126
20 130
21 144
22 156
23 160
24 172
25 176
26 188
27 198
28 202
29 210
30 218
 
  • Chevron 3 and 4-car carriers should be mounted on chassis with low profile cabs and a minimum FAWR 12,000 lbs. for the cab carrier.
  • Chevron reserves the right to improve or upgrade its products without obligation to modify previously manufactured units.
  • Patents: Carrier Wheel Lift #5,061,147;  AutoGripTM II  #5,692,871; BackSaver Wheel Retainer #5,628,069

 


Click here to view this product's brochure