408V/408T RENEGADE


408V/408T RENEGADE
Print Product Brochure
 
STANDARD FEATURES
 Left and Right Side Entry Toolboxes  Lubrication Fittings on all Pivot Points
 Releasable L-Arms  Cable Tensioner (with Winch)
 FMVSS 108 Lighting  Junction Box and Wire Harness
 Safety Chain Pockets  Rear Enclosed Wheel Wells
 Dual Rear Controls  Pilot Operated Holding Valves
 Rear Chain Anchors  Tow Light Plug
 Safety Chains - 5/16, Grade 70  Back-Up Alarm
 Wheel Straps  In Prime
 12 Inch Sills  Mudflaps
OPTIONAL FEATURES
 Slanted Pylon  Aluminum Trim Light Pylon
 Rear Wheel Fender Flares  Jumbo Lighted Tunnel Toolbox
 Pump  In-Cab Electric Remote Controls
 PTO  Stainless Steel Body Sides
 Clutch Pump  Pivoting L-Arms
 AutoGrip Wheel Lift  Radio Remote Control
 Factory Installation  
ACCESSORIES
 Bar Light  J-Hook Chains
 Work Lights  Trailer Hitch Adaptors for AutoGrip
 Switch Panel  Motorcycle Adaptors for AutoGrip Wheel Lift
 Tow Sling  Towbar Adaptors for AutoGrip Wheel Lift
 Fender Flares  L.E.D. Lights
 Magnetic Tow Lights  Pintle Hook (Std Crossbar) 
 2 Inch Frame Forks (Std Crossbar)   Print Product Brochure
SPECIFICATIONS
 Body Width  86 Inches
 Boom Elevation  30 Degrees
 Boom Reach  63 Inches
 Underlift Reach  70 Inches
 Power Tilt Range  Vertical to Negative 10 Degrees
 Control Valve  Sectional, 20 GPM, 1700 PSI
 Oil Reservoir  10 Gallons
 Oil Filter  250 PSI, 15 GPM, 10 Microns
 Direct Mount Pump  18 GPM @ 1200 RPM
 Clutch Pump    9 GPM @ 1250 RPM
 Ratings: (lbs.)   408V 410T
 Winch   9,000 lbs. Planetary 9,000 lbs. Planetary
 Cable   3/8 x 100 3/8 x 100
 Boom      
   Retracted   16,000 16,000
   Extended   N/A 8,000
 Underlift      
   Extended   4,000 4,000
   L-Arms (Paired)   4,000 4,000
   Tow   8,000 8,000
 
 * Load ratings are based on structural factors - not chassis capability or capacity.
CHASSIS RECOMMENDATIONS
 CA  60, 84
 Minimum GVWR  11,000 lb.
 Maximum GVWR  22,000 lb.
 Maximum Frame Height  37 Inches
 Minimum Frame RBM  280,000 in-lbs.
 
 Chevron reserves the right to improve or upgrade its products without obligation to modify
 previously manufactured units.
 This publication is printed in the U.S.A. and is the exclusive property of Chevron, Inc.

Click here to view this product's brochure