Innovation in Heavy-Duty Integrated
Towing and Recovery Equipment


Almost two decades ago, Vulcan became a pioneer in the heavy-duty integrated towing and recovery market with the introduction of the Vulcan 940 and then continued its advancement in equipment technology with the Vulcan 3025. The V-100 is just one more example of Vulcan's continued pursuit in providing the most innovative equipment to meet the demands of professional heavy-duty operators.

Toolbox compartments with keyless entry, 2-speed winches, the Euro-lift stinger with a 144" of reach and a 3-stage recovery boom providing over 25 feet of boom elevation are just a few of the many standard and optional features that have continued Vulcan's legacy as the innovator .... Not the imitator.

View Product Brochure


Dual Control Stations with Direct
      Link Activated Levers
Pressure Gauges
Hour Meter Hydraulic Pump
Independent Hydraulic Rear Spades Pavement Pads (n/a with Flipper Feet)
Tailboard D-Rings Safety Chain in Rear Pockets
Tailboard Fork & Tie-Down Storage Tailboard Recovery Anchors
Air & Electric Hook Up  


Power Elevation Power Extension
360° Sheave Head Cable Tie Backs
Spherical Bearings in Main Boom Dual 2-Speed Planetary Winches
Cable Tensioners Winch Air Free Spool


Aluminum Modular Body
       w/Rubber Mounting Isolators
LED Body Lighting
LED Tool Compartment Lighting Gas Door Shocks
Chrome Double Action Latches
       w/Remote Lock/Unlock
Adjustable Shelves
Lift Fork Storage Chain Storage
Aluminum Tread-Plate Walkway Mud Flaps


Patented Power Tilt Hydraulic Fold
3-Stage Design 12 FXN Wireless Remote Control with
          Charging/Docking Station
Low Profile 70° Pivoting Heavy Duty
     Fabricated Cross Bar
Low Profile Fork Holders
9 Sets of Cast Steel Forks:   
• Short Axle Fork  • 3” Short   • 3” Medium  
• 3” Tall   • 4.5” Short   • 4.5” Medium   • 4.5” Tall  • 6” Short Offset   • Round Axle Fork
Pivoting Spring Lift Adaptors
Chain Hook End Caps King Pin Tow Plate


Air Shift PTO PolyBilt Body
MMO Power Distribution Light Pylon
Euro Stinger - 144"
     (V70/V-100 only)
Multi-Position Flipper Feet
Rear Outrigger    Heavy Duty Tire Lift
Tire Lift Storage Brackets Fork Risers
Pintle Hook Attachment 5th Wheel Plate
     (Requires Pintle Hook Attachment)
King Pin Attachment
     (Requires Pintle Hook Attachment)
Trailer Ball Adapter
     (Requires Pintle Hook Attachment)
Additional Lift Forks Underlift Light Kit (LED)
Additional Lighting Side Work Lights
Chain Package Endless Loop Sling Package
Screw Pin Shackle Kit Spreader Bars
Tailboard Underlift Controls 3 or 4 Drawer Toolbox
Water Tank Kit Snatch Blocks
Wide Load Light Bar Dual Camera & Monitor
Convenience Groups Aluminum Dress Up Kits
Installation 22,000 lb. Winch
View Product Brochure


V-100   (3 Stage)  
     Boom Structural Rating (S.A.E.)
           Retracted  35˚          
100,000 lbs
          Extended  35˚ 18,000 lbs.
     Maximum Angle 35˚
     Maximum Hook Height (inches) 304"
     Hydraulic Boom Extension 216"


V-100 (Standard)  
Capacity Fully Extended to C.L. of Forks 18,000 lbs. @ 116"
Capacity Fully Retracted to C.L. of Forks 55,000 lbs. @ 60"
Underlift Tilt 18°
Tow Rating 80,000 lbs
V-100  (Euro-Stinger)  
Capacity Fully Extended to C.L. of Forks 18,000 lbs. @ 144"
Capacity Fully Retracted to C.L. of Forks 55,000 lbs. @ 67"
Underlift Tilt 18°
Tow Rating 80,000 lbs


Winch Capacity 50,000 lbs.
Winch Type Dual Planetary Winch
Cable Specifications 3/4" x 250' I.W.R.C.
Vulcan - V-100
Vulcan - V-100 3-Stage


V-100 - Tandem Axle  
      Common Body Configuration 160" C.B.
      Additional Body Configurations 180" / 200" / 220" C.B.
V-100 - Tri Axle  
      Common Body Configuration 180" C.B.
      Additional Body Configurations  200" / 220" C.B.


      Front Axle (lbs.) 14,600 lbs.
      Rear Axle (lbs.) 40,000 lbs.
      Clear C.A. or C.B. 156" to 200" C.B.
      After Frame from Center of Rear Axle 36"
      R.B.M. (in./lbs.) 3,000,000
View Product Brochure

All ratings are based on structural factors only - not chassis capacities or capabilities.  Specifications shown are approximations and may vary depending on chassis selected.   Miller Industries Towing Equipment Inc. reserves the right to change or modify product and or specifications withous notice or obligation.  Some equipment shown is optional. 

All Recommendations are minimums.   Heavier specifications may be required depending on chassis and equipment weight.

The outside frame rails of chassis extending behind the cab must be free of fuel tanks, battery boxes, etc.

Click here to view this product's brochure