Miller Industries, Inc. logo
Share
Contact

Contact Us

512T Integrated

Chevron has just introduced their new Model 512 integrated towing and recovery unit. The 512 features a 12 ton retracted recovery boom with dual in-line planetary winches complete with air free spool and 150’ of 7/16” wire rope.

More +

The recovery boom at full extension reaches 71” past the tailboard when horizontal and can be elevated up to 41°. The under lift provides up to 78 1/2” of reach with a lift capacity of 7,000 lb extended and 9,000 lb retracted using the lift forks. The tailboard of the 512 includes rear “D” rings, built in safety chain pockets, recessed area for air and auxiliary light plug ins along with optional multi-position hydraulic rear spades. The 108” CA aluminum modular body provides spacious storage for your tools and attachments including built in storage racks for your lift forks. The bolt on rear quarter panels of the 512 provides sleek automotive style and is constructed of high impact composite material that can be easily replaced in case of damage without replacing the entire side. Other features include a large tunnel box; LED body lighting and gas assist shocks on the compartment doors.

Features

Top of Page

Standard

  • Aluminum modular body sides with two tool compartments each side
  • 28 in. tunnel through box with tool compartment lights
  • Tool compartment door closures on all doors
  • 12,000 lb. Planetary winches
  • 108 CA
  • 7/16” x 150 ft. cable
  •  Air free spool winches
  • Cable tensioners
  • 3 inch forks
  • 4 inch forks
  • Spring shackle adapters
  • Low profile offset fork holders
  • Underlift crossbar extensions
  • L.E.D. lights
  • L-arm storage pockets
  • 6000 lb. L-arms
  • Wheel straps and ratchets
  • Safety chain pockets
  • Safety chains
  • FMVSS 108 lighting
  • Junction box with wire harness
  • Pilot operated holding valves
  • Lubrication fittings on all pivot points
  • Dual rear controls
  • Rear shackles
  • Tow light plug
  • Backup alarm
  • Mudflaps

Optional

  • Hydraulic rear stabilizers
  • Medium duty underlift chains
  • PTO
  • Trailer ball adapter
  • Light weight 4,000 lb. L-arms
  • Radio Remote Control
  • Glad Hand and seven pin connector
  • Fifth wheel attachment
  • Crossbar end hooks
  • Bar light
  • Work lights
  • Switch panel
  • Magnetic tow lights
  • Electric wire remote control for underlift
  • Pintle ball hitch adapter
  • Light pylon
  • Air and electrical hookups
Units
US
Metric

Specifications

Boom

Boom Rating Retracted 24,000 lbs.
Boom Rating Extended 10,000 lbs.
Boom Elevation 41 degrees
Reach (Past Tailboard) 71 in.

Wheel-Lift

Tow Capacity 20,000 lbs.
Retracted 9,000 lbs.
Extended 7,000 lbs.
Reach (Tailboard to Center of Fork) 78.5 in.
Negative Tilt Range -10°

Chassis Recommendations

GVWR 25,950 - 31,000 lbs.
Cab to Axle (Clear) 108”
Tire Size 255/70R22.5
Minimum Frame Height 35”
Maximum Frame Height 38”
Minimum Frame RBM 800,000 in/lbs. (each rail)

Body Specifications

Body Width 96 in.

Winch Rating & Cable

Winch Type Planetary
Rating (first layer of drum) each winch 12,000 lbs.
Diameter and Length (each winch) 7/16" x 150'

Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.

Similar to 512T Integrated

408T & 408TA 2465

Financing Available

Top of Page
Miller Financing banner
  • 24–72 Month Terms
  • 24 Hour Turnaround
  • Quick & Easy